Skip to main content
Software and Automation

From SOLIDWORKS Tube Design to Bend Data

A CNC tube bender needs bend data, which is the feed, rotation and bend angle for every bend, not a 3D model. Software such as TubeWorks pulls that data straight from SOLIDWORKS along with cut lengths and drawings. Programs come out right the first time instead of being measured and typed in by hand.

The two common bend data formats

Format What it describes Where it is used
XYZ The 3D coordinates of each intersection point along the tube’s centerline Design, inspection and exchange between systems
YBC, also called LRA For each bend, the straight length to feed, the rotation between bends and the bend angle What the bender runs

Software converts XYZ points to YBC steps, adds the tube’s diameter, wall and radius, and works out the cut length of straight tube needed before bending.

What you get from the model

  • Bend data ready for the machine, for each part.
  • Cut length, so tube can be cut or laser processed before bending.
  • The unbent shape for parts that are laser cut flat, then bent.
  • 2D drawings with bend tables for the shop floor and inspection.

TubeWorks is a SOLIDWORKS add-in that extracts this information from native and imported tube models, including STEP, IGES and Parasolid files. It generates CNC bend data, 2D drawings and the unbent configuration for tube laser cutting (SOLIDWORKS partner listing).

TubeWorks for SOLIDWORKS walkthrough, from model to bend data. It covers measurement, feasibility checks and sending bend data to the machine.

A real example

Using TubeWorks, Harco processed 200 tube assemblies in two days, and that included the time to learn the software (ITEC case studies).

Design checks that save tooling and scrap

  • Straight length between bends. Rotary draw benders need a straight section to clamp on (The Fabricator). Check the shortest straight in every part.
  • Standard radii. Every new radius needs new tooling. Design to radii your tooling already covers where you can.
  • One radius per part where possible. Several radii in one part may call for a multistack machine.
  • Clearance. Check that the part will not hit the machine or tooling as it rotates between bends. Simulation shows this before the first tube is cut.

What bend data does not include

Bend data describes the shape you want. It does not include springback, which depends on material and tooling. The bender applies those corrections from its own tables. See how to control springback.

Common questions

Do we need SOLIDWORKS?

TubeWorks runs inside SOLIDWORKS. Models from other CAD systems can be imported as STEP, IGES or Parasolid files and processed there.

https://www.youtube.com/watch?v=_ZxvS6ubxJg
TubeWorks extracting bend data from SOLIDWORKS, IGES and Parasolid files. Imported models are processed the same way as native SOLIDWORKS parts.

Can we use one program on different benders?

The YBC values describe the part, so they largely carry across machines. Each machine still needs its own tooling data and corrections.

Is this only for complex parts?

No. Even simple parts benefit, since cut lengths and bend data are calculated instead of measured. The gain grows with every part number you add.

Get it with your machine

Every machine ITEC delivers comes with TubeWorks, so engineering and the shop floor work from the same data from day one. Learn about TubeWorks or book an introductory meeting.

The World’s Largest Range of
Tube, Pipe & Profile Bending Machines